Amazon Basics Classic Puresoft PU Padded Mid-Back Height Adjustable Office Computer Desk Chair with Armrest, 26″D x 23.75″W x 42″H, Black

Great value for the price
Easy to assemble, comfortable, sturdy. Back support is decent but you may want to add a lumbar cushion for longer periods of use. Looks exactly as pictured. Rolls smoothly and doesn’t make a ton of noise. I am 5’6″ and at the shortest setting my feet just barely hit the floor, so shorter folks may want to have a footrest available. Overall, recommend as a good budget desk chair

Happy with this purchase
This chair would have been a lot lighter if they’d used aluminum instead of rolled steel, but still quite comfortable! The Allen Wrench that is included is NOT very sturdy, so it rounded off about halfway through the assembly. The base seems to be pretty solid. adjusting the height is easy, the tilt tension adjustment is NOT as good as it could be, but it works! all in all I am happy with this purchase! As for durability? Only time will tell.

I like it.
The quality is great considering the price. Size: For the most part the size is good. If the seat were longer it would be better. About 2 inches of my thighs hang off the front. Adjustment capacity: It adjust quite a bit. I prefer mine on the lowest setting because I like for my feet to touch the floor. Thickness: As of right now, it seems thick enough. We will see how it feels and what it looks like after I have used it for a while. The chair over all is very comfortable and it was VERY easy and simple to put together.

Ok chair … for the price … preliminary assessment.
This chair is to replace an older chair that had simply worn out over a span of about 15 years of use. I was looking for a quick, budget minded replacement and then will spend probably weeks looking at a higher quality chair, with full high back. At this price, I was not expecting a high quality chair, and that is what I got. It is more or less easy to assemble. It can be a bit tricky when assembling the arm rest. I loosely attached the back two bolts, then the seat. I did the same on the other side, and then tightened them in sequence : Outer back and outer seat bolts, then inner back and inner seat screws. The threads on the back and seat frame are pre-machined but with very little tolerance so you need to be careful not strip them out if you start them at even just a slightly off-angle. Assembling the base and height adjustment assembly went much easier. The chair has a metal inner frame, and base is also metal (there is some wood on the inside sides of the back and perhaps inside the seat). There is some plastic in the base assembly, but that is only cosmetic. Armrest frames are plastic as well. I also replaced the wheels with higher grade wheels I already had on hand (these have a slightly wider tread as well as slightly larger diameter). Finally I went back through and retightened all the screws, taking care not to overtighten. Assembly completion from opening the box to final check was about 30 minutes.The faux leather covering is what you would expect in a chair at this price range. The seat padding is very firm (too firm?) but not uncomfortable for me, but will have to see how it feels after a long session at my computer. The biggest disappointment is the nearly hollow back with NO filling or padding (this is where the parts are stored when shipped). Very little to no support! I had a large bag of batting I was going to use for another project in the near future but decided to stuff it into the back (the bottom has a zipper … remember, this is where the parts were stored). I took care to install the batting evenly, taking care not to overstuff. It made a big difference. The other disappointment was that, although listed as a mid-back chair, it is just barely that. Many other chairs (higher price) typically have at least a 24″ inside back length for a mid-size chair back, as measured from the top of the seat … this one is 22″ The seat depth could have been maybe and inch deeper, as many chairs at this price have (this chair at 17.75″ is barely enough). I am 5’11” and wight about 190 lbs. If you are taller or heavier, this chair might not work well for you. (My daughter, who is medium build at 5′ 7″ thought it was comfortable for her). So here is my summary:PRO: Good price. Seems to be sturdy enough with full metal frame and base. Assembly a bit tricky but just need to be patient and have good lighting.CONS: Seat depth a bit too short. Back offers little to no support without some fill (DIY).So overall, this will do until I can spend some time to look at chairs in person, with better overall quality.

Amazing chair! I actually use it in my kitchen. It goes well with my other chairs but I use this one. Easy to put together too

Muy cómoda, no se reclina pero está bastante bien. El color es precioso

Es una buena silla por el precio en el que la adquirí $1730mxn, los materiales parecen de buena calidad, la imitación de piel es suave y el color es muy bonito, el respaldo es un marco metálico con laterales de madera y como muchos comentan está completamente vacío pues ahí vienen los reposabrazos, cilindro, estrella metálica, llantas y tornillería, dejando el respaldo con no más de 2cm de relleno, esto lo solucioné con un par de cojines de hule espuma, en cuanto al tamaño yo que mido 174cm y peso cerca de 120kg lo sentí bien aunque me hubiese gustado que los posa brazos fuesen mal altos o unos centímetros más anchos, las medidas del asiento son de 49cm de ancho por 47 de profundidad, el respaldo tiene 46cm de ancho por 54 de alto.